Skip to content

Level 03 · Pre-assembled modules

Pre-assembled and tested modules

DefChain supplies pre-assembled hardware modules built to your work instructions and tested to your acceptance criteria. Typical sub-assemblies include cable harnesses, electronics enclosures, actuator assemblies and power distribution units. Your team retains design authority, firmware, final integration and acceptance.

Built to
Your work instruction
Tested to
Your acceptance criteria
Traceability
Serial number and part lots
Delivered
Ready for final integration

Where sub-assembly work hurts

Whether it is a drone, a radar, a ground vehicle or a satellite subsystem, the same problems come up once a hardware team moves from tens of units to hundreds. This is what changes when the module comes from us.

Your best technicians spend days on harnesses and brackets

Repetitive sub-assembly moves to us. Your people stay on integration, test and the next design.

A contract win doubles the monthly volume

We take the ramp-up without you hiring and training a new shift. Quantities are agreed per call-off.

The build stops because one part is missing

We own every line of the module BOM, including the slow and hard-to-find ones, and can hold an agreed buffer.

Quality depends on who built the unit

Every unit follows one work instruction and your acceptance criteria. You sign off the first article before series.

Traceability work lands on engineers

Each module has a serial number linked to its part lots, certificates and origin records, ready for your customer.

Every sub-assembly needs space, fixtures and stock

Fixtures, tools and parts stay with us. Modules arrive to your schedule, ready to fit.

All lines handled before assembly

Every line of the module's BOM is sourced, inspected and recorded by us, then assembled and tested in one step. The example is a motor-arm module; the same applies to enclosures, harness sets and actuator assemblies. Switch to the exploded view to see every line.

Motor-arm module MA-01 on two V-blocks: carbon arm tube with serial label, ESC strapped on top with cable ties, braided phase leads to a 2806 motor on a bead-blasted aluminium mount, power leads to an XT60 connector.
Example module · MA-01 motor arm · S/N MA-0001 · hover a marker for the BOM line made to drawing purchased

What stays with you, what moves to us

Stays with you

  • Design authority and drawings
  • Firmware and software
  • Final integration and acceptance
  • The relationship with your customer

Moves to us

  • Sourcing every line of the module BOM
  • Incoming inspection of parts
  • Assembly to your work instruction
  • Checks to your acceptance criteria
  • Serial numbers and lot records
  • Packing per unit, delivered to schedule

Which sub-assemblies to start with

Typical modules

  • Cable harnesses and cable sets for vehicles, shelters and racks
  • Electronics enclosures: housing, connectors, seals and boards fitted
  • Power distribution units and connector panels
  • Sensor, camera and antenna heads with mounts
  • Motor and actuator assemblies with wiring: drones, robots, positioners
  • RF cable and antenna assemblies
  • Brackets, frames and harness sets for ground support and test equipment

A good first candidate is

  • Built the same way every time
  • Takes real hands-on time per unit
  • Has a check you can describe: continuity, fit, torque or function
  • Holds up your line when it is late

We do not assemble battery cells or energetic materials. Firmware, calibration and final acceptance stay with your team.

What we need from you

Drawings and BOM
For the module and every part in it.
Work instruction
Or a sample we can document together with you.
Acceptance criteria
What is tested, how, and the limits.
Approved sample
The first-article build you sign off before series.

Modules: common questions

Who defines the tests?

You do. We build and test to your work instruction and acceptance criteria. Simple test fixtures can be made to your specification.

How do we start?

With a first-article build that you approve. Series builds follow the approved sample, work instruction and test record.

What happens to a module that fails a test?

It is held, the cause is found, and it is reworked or replaced with your approval. It never ships as passed.

Do you build complete products?

No. We deliver tested modules for your final integration, so the end product stays in your hands.

Tell us which sub-assembly slows your line

We start with one first-article build for your approval.

Send a request